Before you start, it's important to know which chip your cable uses. You can check by plugging the cable into your PC (without the driver installed) and opening Device Manager . Under "Other Devices" or "Ports (COM & LPT)", you'll likely see a device with a yellow exclamation mark and a label like "USB Serial Port" or "FT232R USB UART". That label often indicates the chip.
Designed for OMRON CS1W-CN226, CS/CJ/CQM1H, and CPM2C series PLCs.
Open the Windows (Right-click the Start button and select Device Manager). Look under Other Devices or Ports (COM & LPT) . amsamotion usbcn226 driver download link
On Windows 10 and 11, you can attempt to plug the device in. If the LED lights up but the device is not recognized:
Once you have obtained the driver file (usually named AMSAMOTION.EXE ), follow this straightforward procedure to install it. These steps are based on the latest instructions for Windows systems. Before you start, it's important to know which
Amsamotion hardware typically relies on third-party USB-to-Serial chips, most commonly manufactured by (WCH) or PL2303 (Prolific). Newer generations of the USBCN226 cable almost universally use the CH340 chip due to its high stability on Windows 10 and Windows 11.
Do use:
The Amsamotion USBCN226 cable may ship with either an or a CH340 chip. The official drivers from those manufacturers are the most reliable. You can determine the chipset by looking at the cable's casing or by plugging it in and seeing how Windows detects it in Device Manager.