Canon Mg2540s Service Tool

Ensure the printer is plugged in but turned completely off.

A: Either the reset failed (try again) or the EEPROM is corrupt. Also, ensure you are actually in “Service Mode” – the power light must be solid green, not flashing.

If successful, the green LED will flash for a few moments and then stay solid green. Your computer may notify you that it found "New Hardware" or an "Unknown Device." Your printer is now ready for the software. Step 2: Download and Run the Right Software Version canon mg2540s service tool

Press and hold the Stop/Reset button (the triangle inside a circle).

A dialog box should pop up saying "A function was finished." Click OK. Ensure the printer is plugged in but turned completely off

: Clears the "Ink Absorber Full" error by resetting the internal counter to zero. EEPROM Operations

Your Canon PIXMA MG2540S is a reliable budget printer, but it has a built-in safety countdown. Eventually, the machine will stop printing, flash its alarm lights, and display an error code like or 1700 . If successful, the green LED will flash for

Next, look for the section further down the tab. Ensure the value is set to 0% and click Set .