Measure the distance between the two marks in millimeters. This 4-digit number is your exact calibration code. Step-by-Step Programming Sequence
Attach the magnet to a spoke on the front wheel, ensuring it passes within of the sensor. Unit Mounting: Mount the computer head to the handlebars. 4. Operational Instructions
: Community-driven sites like Wikidot sometimes host direct download links for specific Echo T3 documentation, though users should ensure files are from reputable sources. Core Setup and Calibration Steps echo t3 cycle computer manual free
Correct physical alignment is critical. If the sensor and magnet are too far apart, the computer will display a speed of zero throughout your ride. 1. Mounting the Bracket Place the rubber pad onto your handlebars. Position the mounting bracket over the pad. Secure the bracket firmly using two plastic cable ties.
: Use a coin to turn the battery cover counterclockwise. Measure the distance between the two marks in millimeters
To calculate speed and distance accurately, the Echo T3 needs your exact wheel circumference in millimeters. The screen will display a flashing default four-digit number (usually 2155 ). Use the button to change the flashing digit.
If your computer doesn't know the exact circumference of your tire, your speed and distance readings will be inaccurate. Unit Mounting: Mount the computer head to the handlebars
: Displays the highest velocity reached during the current tracking session.
: Current speed, trip distance (DST), total odometer (ODO), and maximum speed (MXS). Time Tracking
The Echo T3 uses a "Mode" button to cycle through various data screens: