Epson L3250 Waste Ink Pad Resetter [work]

It estimates how much ink has been sent to the pads based on the number of cleanings and pages printed.

Look for a specific zip package tailored for the series. Step 2: Prepare Your Computer and Printer

To reset the waste ink pad counter on your Epson L3250 , you typically need to use the Adjustment Program (also known as "AdjProg") or a WIC (Waste Ink Counter) Reset Utility epson l3250 waste ink pad resetter

Locate the single screw securing the small plastic cover on the bottom-back left corner. Unscrew the cover and slide it off.

Check the boxes next to Main pad counter and Platen pad counter , then click Check . This displays your current percentage (it will likely read 100%). It estimates how much ink has been sent

. This is required when your printer displays a "Service Required" message or has blinking red lights, indicating that the internal ink pads are technically "full". Methods to Reset the Ink Pad Counter Epson Adjustment Program (Free Method): Download and run the Adjustment Program specifically for the L3250 model. Select the model and choose Particular Adjustment Mode Find and select Waste Ink Pad Counter from the list. Check the boxes for Main pad counter Platen pad counter , then click to see the current status. Select the boxes again and click Initialize

Every cleaning cycle sends ink to an internal sponge. Unscrew the cover and slide it off

Before you begin, ensure your printer is connected to your computer via a USB cable. Wi-Fi connections are often unstable for firmware-level resets.

You can use a standard resetter tool to clear the error message:

Gently pull out the grey plastic maintenance box housing the ink-soaked pads.

If you want to make sure you have everything ready before starting, let me know: What your computer uses (Windows or Mac?)