Etech Accuset Clock Radio Manual Extra Quality

Press and hold the button until the year digits begin to flash.

: Locate the switch on the bottom or back of the unit. Slide it to your region (Eastern, Central, Mountain, or Pacific).

Low-quality manuals just say "Brightness control." The extra quality method is knowing that on the eTech AccuSet, holding the bar for 2 seconds cycles through three modes:

Press and hold the button until the hour digits flash.

Alarm & clock features

Insert a fresh CR2032 battery with the .

Press the Alarm 1 button repeatedly until the alarm indicator light on the screen disappears. Radio Tuning and Audio Optimization

Thank you for purchasing the . Designed for effortless precision, the AccuSet system automatically sets and updates the time using a built-in radio-controlled signal, ensuring you are never late.

Some models have a DIMMER button to adjust brightness for dark rooms.

Press and hold the TIME ZONE button and press ≪is much less than or ≫is much greater than to select your local zone. Date/Time Setting: Press and hold the SET button. Use the ≪is much less than (reverse) or ≫is much greater than

Internal software automatically shifts the hour forward or backward during Daylight Saving Time transitions.

Unplug the device from the wall, open the bottom compartment with a small screwdriver, swap the old battery with a fresh one, and plug the power cord back into the wall outlet immediately. ❓ Troubleshooting Guide Potential Cause Actionable Solution No Power Loose wall plug Ensure the AC cord is firmly seated in a live wall outlet. Incorrect Hour Wrong time zone chosen

Always install a fresh in the bottom compartment. While it will not power the display or radio during an outage, it saves your time and alarm settings so they do not reset. Fixing Weak Radio Reception If your radio static is high, try these fixes: For FM: Fully extend the thin wire antenna on the back.