Absolutely. The GP‑80 series driver package supports almost every 80‑mm thermal printer from Gprinter/Gainscha, including GP‑80220, GP‑80250, GP‑80300, GP‑U80160, GP‑U80250, GP‑H80300, and many others.

Uninstall the current driver, download the Wasp v4.51 driver, and reinstall. C. Printer Shows "Offline" or Not Responding

Keep these data variables in mind when configuring your POS transaction software workflows:

The (often part of the Gprinter line) is a reliable entry-level thermal receipt printer known for its high integration and compact design. Performance & Key Features

Reinstall using standard and match the COM port speed exactly. Receipt prints but won't cut Cutter is disabled in the driver spooler settings. Go to Printer Properties →right arrow Device Settings →right arrow Turn on Cut After Document or Cut After Page . Windows error: "Unknown USB Device" Missing the Virtual COM port architecture.

: Match the bits-per-second rate (typically 9600 or 19200 ) and data bits exactly with your POS software's COM settings.

The refers to the Gprinter GP-80160 series of 80mm thermal receipt printers . The "NCUT" designation typically distinguishes between models with an automatic cutter (Cut) and those without (No Cut). Driver & Support Overview

Note: Always exercise caution when downloading drivers from the internet. It is best practice to download directly from the manufacturer's official support page or an authorized distributor.

If you have a “Cut” series printer but the paper does not cut after each print job, the cutter feature may not be enabled in the driver or the software. Verify that the printer model selected in the driver properties is the variant, and check that your POS software sends the appropriate ESC/POS cutter command (GS V).

: