Hikvision Maximum Number Of Channels Under Playback Reached New

Hik-Connect users often report that failed connection attempts (where the app hangs at 90% load) may leave "ghost" connections open, eventually consuming all available streams. A system reboot resets these connections but is only a temporary fix.

In this article, we will dissect why this error occurs, what the "new" channel limits are for current Hikvision models, and the step-by-step methods to bypass or resolve the restriction.

If a mobile app or client software closes improperly, the NVR may keep that session open, falsely counting it against your maximum stream limit.

The fastest way to clear stuck video connections is a simple reboot. Navigate to the main on your NVR or DVR. Select Shutdown , then click Reboot . If a mobile app or client software closes

The most immediate fix is to reduce the number of cameras you are trying to watch at once. If you are in a , switch to a 4-window view . Close any cameras you don't immediately need to see. 2. Lower the Playback Resolution (Sub-Stream)

He frowned. "I only selected twelve," he muttered to the empty room. He tried again. Same error.

Connect the Hikvision cameras to a third-party VMS (e.g., Milestone, Blue Iris) running on a powerful PC. Software decoding has no fixed channel limit — only CPU/GPU power. Select Shutdown , then click Reboot

: Previous playback sessions that didn't close properly, leaving "ghost" streams active on the NVR/DVR.

typically occurs when your Hikvision NVR/DVR has hit its hardware or software limit for simultaneous remote streams

: Each NVR/DVR has a fixed "decoding budget." Higher resolution cameras (like 4K) or high bitrates consume this budget much faster than standard 1080p streams. Stuck Network Connections

: Using iVMS-4200 on a PC and Hik-Connect on a phone at the same time for the same device can trigger this restriction. Recommended Solutions

: Close playback on other mobile devices or PC clients before starting a new session. Stuck Network Connections