Ivoclar Programat P100 Manual English

The has long been a staple in dental laboratories worldwide, recognized for its reliability, precision, and user-friendly interface. As a compact, high-performance ceramic furnace, it is specifically designed for the firing, staining, and glazing of dental ceramics.

A complete manual for the Programat P100 typically includes the following core chapters:

For older P100 units (pre-2015), contact Ivoclar technical support directly with your device serial number. ivoclar programat p100 manual english

: A multilingual document (German, English, French) for the P100 can be found on Stock-Dent , which identifies part numbers for the furnace head and control unit.

Comprehensive Guide to the Ivoclar Programat P100 Manual (English) The has long been a staple in dental

Never touch the outer shroud of the heating chamber or the lower insulation platform during or immediately after a cycle. Temperatures can cause severe burns.

Press START (green) to initiate a selected firing program. Press STOP (red) to interrupt or pause a running cycle. : A multilingual document (German, English, French) for

Press the key corresponding to the parameter you want to change (e.g., press for Firing Temperature).

Enter the desired program number using the keypad (e.g., Program 15 ) and press .

Unlike the higher-end models (like the P310 or P510) which use touchscreens, the P100 manual describes a user interface based on a .

The maximum peak temperature required to mature the ceramic material. The duration the furnace stays at the peak temperature ( Vacuum On V1cap V sub 1 The temperature at which the vacuum pump activates. Vacuum Off V2cap V sub 2