Freezing the display at a known fix and entering exact coordinates.
: The main computer screen interface. It displays five lines of green or amber text.
The Maintenance section includes a note about the Gyro Bias Temperature Coefficient . The manual instructs the technician to run the “Gyro Thermal Calibration” routine, which requires placing the unit in a thermal chamber and cycling from -20°C to +55°C while logging raw angular rate data. ltn-92 manual
The LTN-92 is a popular option for high-fidelity add-ons like the Felis 747-200 for X-Plane. However, flight simmers occasionally encounter bugs such as crashes when entering bearing/range waypoints or master unit sync issues where slave units don't update their flight plans correctly. Often, these issues can be resolved by reinstalling the aircraft or checking the tablet settings.
| Error Code | Description | Solution | | --- | --- | --- | | E01 | System initialization failure | Restart device and try again. | | E02 | Display screen malfunction | Calibrate display screen and try again. | Freezing the display at a known fix and
If the system shows a position error greater than the certified knots-per-hour rate, a recalibration or sensor check is required. 5. Summary of Technical Specifications Specification Sensor Type Ring Laser Gyro (RLG) Alignment Time ~10 Minutes Accuracy 2.0 nm/hr (standard) Interfaces ARINC 429, Analog, and RS-232
| Issue | Solution | | --- | --- | | Device not turning on | Check power connection and ensure device is properly plugged in. | | Display screen not functioning | Check display settings and ensure proper calibration. | | Error messages | Refer to the error code list in Appendix A. | The Maintenance section includes a note about the
: Unlike the old Carousel IV-A, you don't have to punch in every Lat/Long. You can enter 5-letter RNAV identifiers, 4-letter ICAO codes, and VOR/NDB fixes directly.
"If we lose the laser-gyro, we lose the horizon," the pilot shouted over the roar of the engines. "Find the override, Elias!"
Input the current airport gate coordinates into the POS (Position) page. Initiate Alignment: Move the selector to ALIGN.
The system is powered down. It is vital to ensure the aircraft is stationary before moving out of this mode. ALIGN (Alignment)