Mikrotik L2tp Server Setup [top] Full Jun 2026

: Enter a strong, pre-shared key (e.g., MySuperSecretKey ). Clients will need this key. Authentication : Check mschap2 . Click Apply and OK . Step 5: Create a VPN User (Secrets) Create credentials for a user to connect to the VPN. Go to PPP -> Secrets . Click + (Add) . Name : remoteuser Password : UserPassword123! Service : l2tp . Profile : l2tp-profile . Click Apply and OK . Step 6: Firewall Configuration (Crucial)

But note: this requires return routes on your LAN devices or proper subnet routing.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Each user needs a PPP secret entry. Replace john and securepassword123 with your own. mikrotik l2tp server setup full

/ip ipsec proposal set [ find default=yes ] auth-algorithms=sha256 enc-algorithms=aes-256-cbc lifetime=1h pfs-group=none

Using L2TP offers several benefits, including:

: Enter a strong pre-shared key (e.g., SuperSecretIPsecKey ). Remote clients will need this key to connect. Click OK . 🔒 Step 5: Configure the Firewall Rules : Enter a strong, pre-shared key (e

: Verify that you enabled proxy-arp on your main local bridge interface. Also check if the client device profile has "Use default gateway on remote network" enabled if you wish to route all web traffic through the VPN.

Ensure these rules are placed any action=drop rules on the input chain.

/ppp profile add name=l2tp-profile local-address=192.168.89.1 dns-server=192.168.88.1 remote-address=l2tp-pool bridge=bridge1 Click Apply and OK

Administrative access to the router via Winbox or the WebFig interface.

Double-click your local bridge interface (usually named bridge or bridge-local ). Under the tab, locate the ARP dropdown menu. Change it from enabled to proxy-arp . Click Apply and OK . Step 7: Connecting Client Devices