Xplus Firmware Install - Qidi

[Download Firmware] ➔ [Extract to USB] ➔ [Insert into Printer] ➔ [Boot & Flash]

Comprehensive Guide to QIDI X-Plus Firmware Installation (Stock & Klipper)

If your printer is connected to Wi-Fi, this is the easiest method. On the touchscreen, open the Check for Updates qidi xplus firmware install

Never update Klipper or other components through the Fluidd or Mainsail web interfaces. QIDI uses a customized "dirty" fork of Klipper; updating via standard repositories can brick your machine.

Access the system menu and navigate to > System Update . Select the update via USB option. [Download Firmware] ➔ [Extract to USB] ➔ [Insert

Drag the folder directly into the root directory of your USB stick. Installation Process : Ensure the printer is OFF . Insert the USB drive into the printer's USB port. Turn the printer ON . Navigate to the "Suitcase" icon (Settings) > "About" icon .

Ensure you have the correct firmware version for your specific mainboard (e.g., the original X-Plus vs. the X-Plus II or later versions). Installing the wrong version can brick the machine. Access the system menu and navigate to > System Update

This indicates a corrupted flash or a mismatched firmware version. Power off the machine, download the firmware again to rule out file corruption, verify it matches your exact board model, and re-attempt the boot-flash sequence. Touchscreen Controls Are Inverted or Unresponsive

This happens when the host Linux system updates, but the physical microcontroller unit (MCU) on the mainboard or toolhead board missed the update.