Follow the on-screen prompts. Choose the option to format and flash to the internal eMMC.
Used to run the flashing software and prepare the bootable media.
Once logged into the terminal, type the following command to launch the internal installation script: ./install-to-emmc.sh Use code with caution. realunix pro hg680p install
If any assumption is wrong, provide corrections.
If you flashed a generic image (like Armbian), the box might boot to a black screen. You need the right DTB: Follow the on-screen prompts
Note: If the device boots directly into the old IPTV interface, power off and try again. Some versions require a specific "upgrade mode" triggered by shorting specific pins on the motherboard, but USB boot usually works via the reset method for modern custom ROMs.
Keep holding the button for 10 to 15 seconds until you see the RealUnix Pro boot screen or text scrolling on your monitor. Release the button. Method B: ADB Command Line (If Android is still accessible) Once logged into the terminal, type the following
There are multiple revisions of the HG680P (e.g., HG680P_MCU vs. HG680P_AC ). open the box (4 rubber feet screws) and check the PCB version before flashing. Flashing the wrong .dtb file will brick your device.
Enhanced support for Samba, NAS, and torrent management.
Once the device shows as connected in the USB Burning Tool, you are ready to flash the new OS.