Shows remaining credit, error codes, and consumption data.
Carefully enter the 20 digits. If you make a mistake, press the button (usually represented by an arrow or clear key) to erase the last digit.
The keypad interface cannot communicate with the main measurement block (common in split-meter setups). siemens cashpower 2000 pre paid meter user manual
Once submitted, the screen will display one of the following messages:
If your meter displays an error message, use this list to identify and resolve the issue: DD / DISCONNECT The internal switch is open, cutting off power. Shows remaining credit, error codes, and consumption data
Shows the last 20-digit token successfully entered into the meter. Displays the credit value added by the last valid token. 030
One of the most useful features of the Siemens Cashpower 2000 is the . If you run out of credit at 2 AM and cannot buy a token, this feature saves you. The keypad interface cannot communicate with the main
The token is valid. Your credit balance will increase immediately, and the contactor will close to restore power.
Displays the current power limit (the maximum load your meter can handle before tripping).
A: The CIU goes into "Sleep Mode" to save power. Press any button to wake it. If it remains blank, check the circuit breaker in your main distribution board. The CIU may be dead (requires replacement).