/interface list member add interface=dockers list=LAN
/ip firewall address-list add list=direct-list address=10.0.0.0/8 comment="Local networks bypass"
Enable the container feature if it isn’t already, and reboot the router. /system/device-mode/update container=yes Use code with caution. Note: This requires a physical hard reboot. 2. Set Up Virtual Ethernet (veth) v2ray mikrotik
/routing table add name=to_v2ray fib /ip route add gateway=192.168.88.254 routing-table=to_v2ray distance=1 Use code with caution. Alternative Method: Native RouterOS v7 Containers
: Your router must have an ARM, ARM64, or x86 CPU. MIPSBE devices generally do not support containers. MIPSBE devices generally do not support containers
Before touching the terminal, understand the layers. V2Ray typically listens on a or HTTP proxy port (e.g., 1080) or uses transparent proxy (TPROXY). MikroTik does not natively speak VMess or VLESS.
After completing the setup, it's crucial to verify that your configuration is working correctly. and the modern
MikroTik does not natively support the VMess or VLESS protocol. Therefore, every "V2Ray MikroTik" setup is essentially a sophisticated routing trick. The most robust, long-term solution is to use that directs specific traffic to a Linux-based V2Ray transparent proxy .
You must build a valid config.json file for your V2Ray setup. This file must configure an set to accept transparent proxying (TProxy or Dokodemo-door) and your specific outbound proxy (VMess/VLESS credentials provided by your server).
Method 1: Deploying V2Ray via RouterOS Containers (Recommended)
user wants a long, comprehensive article about "v2ray mikrotik". This likely involves integrating V2Ray (a proxy platform) with MikroTik routers (RouterOS). The article should cover technical and practical aspects. I need to follow the search plan. I'll start with Round One operations. search results for the initial queries have provided some relevant links. I need to open some of them to gather more detailed information. I'll open results 0, 1, 2, 5, 6, 7, and 8 from the first search, and results 0, 1, 2 from the second search, and result 0 from the third search, and result 1 from the sixth search, and result 2 from the seventh search. have gathered information from several sources. The Gist provides a detailed client setup. The v2android articles offer guides. The forum discussions highlight community needs and solutions. The GitHub repos provide container-based setups. I need to structure a comprehensive article. The outline is ready. I'll now write the article.rating V2Ray with MikroTik RouterOS opens up powerful possibilities for traffic routing and network management. There are two primary ways to achieve this: the more traditional method of configuring a V2Ray client on the router's host system, and the modern, more robust method of using RouterOS's native container capabilities to run V2Ray. This guide will provide a deep dive into both approaches.