A: The 2021 model requires a full reset AND calibration. Follow Section 6 (Factory Reset) then immediate Auto Calibrate. If “Err Cal” persists, the main sensor board may have failed—order ZXD-2021-SB.
ZTE ZXD3000 Rectifier User Manual (2021 Edition): Installation, Configuration, and Troubleshooting Guide
Solid On: Output over-voltage lockout, fan failure, or catastrophic internal hardware failure. Off: Normal operation. 5. Maintenance and Troubleshooting zxd 3000 user manual 2021
If the yellow or red LED is illuminated, the table below will help diagnose the issue.
or indicator light patterns (e.g., blinking red). The software version (e.g., V5.0, V5.5, V5.6). A: The 2021 model requires a full reset AND calibration
Do you require the exact or addressing schemas?
2 - ZXD3000 (V5.5) Rectifier Module User Manual | PDF - Scribd Maintenance and Troubleshooting If the yellow or red
The green RUN LED will flash during initial boot-up and turn steady green within 30 seconds as the host controller assigns an internal address. Removing a Module
| | Parameter | Value / Range | | :--- | :--- | :--- | | Basic Info | Manufacturer | ZTE Corporation | | | Model | ZXD3000 (V5.x / V6.0) | | | Type | Switching Rectifier / Power Module | | | Output Power | 3000 W | | AC Input | Rated Input Voltage | 200 V ~ 240 V | | | Wide Input Range | 75 V ~ 300 V (Adaptive) | | | Input Frequency | 50/60 Hz | | | Max Input Current | ~ 17A – 18A | | DC Output | Rated Output Voltage | 53.5 V | | | Output Voltage Range | 42 V ~ 59.5 V | | | Rated Output Current | ~ 50A – 63.5A | | Mechanical | Dimensions (H W D) | 132mm × 41.5mm × 300mm / 300mm × 40mm × 130mm | | | Weight | Approximately 2 kg | | | Cooling Method | Forced Air Cooling (Intelligent fan) | | Performance | Peak Efficiency | > 96% | | | Power Factor | PF ≥ 0.998 (at rated load) | | Environment | Operating Temp. | -33°C to +55°C (Full output: -5°C ~ +45°C) | | | Storage Temp. | -40°C to +70°C | | | Altitude | < 3000m |
Previous manuals had swapped endianness. This edition uses big-endian for all 16-bit values.
The 2021 ZXD 3000 replaces the old membrane keypad with tactile mechanical keys and a 3.5-inch monochrome LCD.